Add Label Or Area; Shortcut - Brady BMP 71 User Manual

Add Label or Area

Labels cannot be added to files containing serialization.
To add a label to a label file:
Press Label
1.
OR, to add an area to a single label:
Press Area
Choose Add.
2.
Press OK
3.
The new label is inserted immediately after the current label and its number is reflected on the
upper left side of the Status bar. Each label added will be of the same application, label type,
and format.
A new area is added at the end of existing areas and is reflected on the upper right side of the
Status bar. The font size used on the first line of the previous area carries over to the new area.

Shortcut

To add a label using keystrokes:
Press Add Label
1.
To add an area using keystrokes:
Press Add Area
1.
.
.
or Enter .
.
Note Note
.
55
Labels and Areas
Add Label or Area
BMP71 User's Manual