Safety Templates - Brady BMP 71 User Manual

100

Safety Templates

Adding Labels and Areas in Applications
Safety Templates
BMP71 User's Manual
Safety Templates are designed for use with pre-printed die cut and continuous labels. Other die
cut labels with a 2:1 length to height ratio can also be used. Continuous labels will have a
length that is twice the height.
If preprinted die cut media is being used, only two templates are available and the template
does not prompt you for header information. The template automatically adjusts the width of
the areas depending on the width of the media.
For any other media used, you can choose from all six available templates. If the template
contains header information, you will be prompted to select a header.
To use a Safety label type:
Press Apps
1.
Choose NA Safety>Safety Templates.
2.
Press OK or Enter
3.
A dialog displays the templates from which to choose.
Navigate to the desired template and press OK
4.
Navigate to Set Graphics button and press OK
5.
.
.
or Enter .
or Enter .