Getting Started; Entering Text; Editing Text; Inserting Text - Brady BMP 71 User Manual

Getting Started

This section describes the process of creating a text label with minimal formatting, using basic
editing techniques, and printing the label.

Entering Text

Before entering label text, be sure the ribbon and media are loaded and the power is ON.
The blinking vertical line is the cursor and is the starting point for every label you create using
the BMP71 printer. Begin entering text at the position of the cursor. The cursor moves across
the screen as you enter data. The standard font, as defined in the printer Setup configuration
(see page

Editing Text

If you have entered some text in error or want to change the content or format of your label,
edit the information before printing.

Inserting Text

To insert additional text within a line of text:
Position the cursor at the point where text should be inserted.
1.
Enter the text.
2.
Existing data positioned to the right of the cursor moves progressively to the right to make
room for the inserted text. If a fixed font size is selected, when the end of the line is reached,
no more data can be inserted. To add more data, press [ENTER] to start another line or
decrease the size of the font.
27), is in effect. If you want another line of text, press [ENTER].
37
Getting Started
Editing Text
BMP71 User's Manual