Brady BP-IP600-C Manual
  1. Manuals
  2. Brands
  3. Brady Manuals
  4. Printer
  5. BP-IP600-C
  6. Manual

Brady BP-IP600-C Manual

Hide thumbs Also See for BP-IP600-C:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator/
Configuration
Manual
Edition 07/07

Advertisement

Table of Contents
loading

Related Manuals for Brady BP-IP600-C

Summary of Contents for Brady BP-IP600-C

  • Page 1 Operator/ Configuration Manual Edition 07/07...

  • Page 2: United States

    No part of this manual nor any translation may be reproduced or transmitted in any form or by any means, for any purpose other than the purchaser’s personal use, without the express written permission of Brady. United States Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 3 Brady’s high quality specialized materials. To gain the full benefit of the system, material and ribbons from Brady are programmed with the ability to communicate with the printer and software.

  • Page 4: Table Of Contents

    Industry Canada ..........1 Taiwan ............1 Europe ............1 Table of Contents ............i Brady IP™ Printer Operator/Configuration Manual ..1 Copyright ..............1 Safety and the Environment ........2 About the Printer ............2 Intended Use of the Printer ........2 Safety .................

  • Page 5: Table Of Contents

    Custom Material ..........16 Standard Mode........... 16 Label Sensors ............17 Gap Sensors ............17 Reflective Sensor ..........18 Brady Mode..........18 Standard Mode ..........18 Device Types ..............20 Driver Settings ............20 Peel-Off Mode............21 Tear-Off Mode ............22 Loading the Ribbon and Material.........
  • Page 6 Table of Contents Font List ............40 Device List ..........41 ASCII Dump Mode ........42 Test Grid............44 Label Profile ..........45 Setup Menu............47 Local Settings ..........47 Machine Parameters ........48 Print Parameters ........50 Interfaces ............52 Security ............
  • Page 7 Table of Contents Please use this page for your individual notes...

  • Page 8: Brady Ip™ Printer Operator/Configuration Manual

    Copyright This manual is copyrighted with all rights reserved. No portion of this manual can be copied or reproduced by any means without the consent of Brady Worldwide Inc. While every precaution has been made to ensure accuracy in the preparation of this document, Brady assumes no liability to any party for any losses or damage caused by errors or omissions or by statements resulting from negligence, accident or any other cause.

  • Page 9: Safety And The Environment

    Safety and the Environment Please read and understand this manual before using the Brady IP Printer for the first time. This manual describes all of the main functions of the Brady IP Printer. The functions actually available depend on the version ordered.

  • Page 10: Safety

    Brady IP™ Printer Operator/Configuration Safety The Brady IP Printer is configured for voltages of 100 to 240 V ~, 50 to 60 ■ Hz. Connect only to a grounded power outlet. The Brady IP Printer may only be used in a dry environment, do not expose ■...

  • Page 11: Unpacking The Brady Ip Printer

    Stress Free System Setup Stress Free System Setup is available, free of charge, in North America. Brady’s Stress Free System Setup helps you set up your new printer and software. To schedule a free phone setup assistance appointment, call 1-800-643-8766 and select Menu Option 4.

  • Page 12: Installation

    Installation Installation Printer Overview VIEW A 2 3 4 VIEW B 17 16 Figure 1, Overview 1. RS-232 port 11. Bracket grooves 2. USB port 12. Ribbon carrier close points 3. Two USB master ports for 13. Ribbon take-up spindle keyboard or scanner 14.

  • Page 13: Printer Location

    1. Plug the power cable into the power connection socket on the back of the printer (Figure 1, 6). 2. Plug the power cable into a grounded 100 to 240 V~, 50 to 60 Hz power source. NOTE: The Brady IP Printer senses the voltage type and automatically adjusts for the power source.

  • Page 14: Interface Connections

    Installation 3. Connect the printer to the computer using the supplied USB cable, an RS-232 cable or an Ethernet cable (refer to Interface Connections on page 7). 4. If you do not have BradySoft, LabelMark or IdentiLab software installed on your computer, refer to Software Installation on page 13. 5.

  • Page 15: Usb Connection

    Installation USB Connection 1. Ensure that the Brady IP Printer is turned off. 2. Connect the printer to the computer using the supplied USB cable. The USB cable connects to the printer at the USB port (Figure 2, 2) and to a USB port on the computer.

  • Page 16: Multiple Printers

    Hardware Wizard will appear. (At this point the Plug and Play process should have created a new USB virtual port. The Brady IP printer driver will be added in later steps.) Cancel the New Hardware wizard. If using Windows XP, skip ahead to step 1.
  • Page 17 Installation Figure 4, Printers Window 1. Ensure the Product CD is in the CD drive. Select Run from your computer’s start menu. Choose the drive where the Product CD is located. Choose Setup\Setup.exe. Choose OK. Figure 5, Run Dialog Box 2.
  • Page 18 Installation 3. Choose the printer. Figure 7, Choose Printer Dialog Box 4. Choose the appropriate port. Figure 8, Choose Printer Port Dialog Box...

  • Page 19: Rs-232 Or Ethernet Printer Driver

    Installation 5. Click Yes. Figure 9, Read Only File Detected Dialog Box 6. Choose to restart your computer. Figure 10, Restart Printer Dialog Box 7. Once your computer has restarted, ensure the added printer is powered on and connected to your computer. Check to make sure the new printer driver is not offline by choosing Start | Settings | Printers and right clicking on the printer icon.

  • Page 20: Software Installation

    On-line Status Monitor The On-line Status Monitor provides printer status information. From the Options menu, you can select Warn if no Brady Smart Supply, Always on top or Unit of Measure (inches or mm). The Help menu provides links to Brady Online.

  • Page 21: Media Setup

    THT printer. Refer to Standard Mode on page 16. The LCD display shows: The Brady logo in the top, left corner which indicates that the printer is ■ operating in Brady mode.

  • Page 22: Metallized Material

    If you are not using Brady-brand supplies but LabelMark, IdentiLab or BradySoft labeling software, the software will ask if metallized material is installed when the printer cannot read a Brady IP enabled Supply. If you answer “yes,” the software will request selection of a part number from a list prior to operation.

  • Page 23: Sleeving Material

    LCD display. This is true for only IP-enabled material (not compatible). Refer to Gap Sensors on page 17. Set the gap sensor switch to the setting displayed and the printer will operate in Brady mode. Refer to Brady Mode on page 14.

  • Page 24: Label Sensors

    These sensors are controlled by a switch setting (Figure 13, 3). The switch can be set to the left or to the right. All Brady IP enabled material will instruct the user, via the front LCD display, which position to set the switch. For non-standard material, set the sensor to position 2.

  • Page 25: Reflective Sensor

    (Figure 14, 2).) Brady Mode 1. The LCD will indicate Brady mode (Figure 14, 1) and show sensor placement information (Figure 14, 2). 2. Open the cover (Figure 1, 9) lower the control panel (Figure 1, 17) , and press the green print module release button (Figure 1, 15).
  • Page 26 Installation R60XX View A Figure 14, Adjusting the Reflective Sensor 1. Designates printer in Brady 3. Sensor window mode 4. Sensor knob 2. Sensor position 5. Scale Figure 15, Reflective Sensor Label...

  • Page 27: Device Types

    Device Types Device Types The Brady IP Printer has a Peel-off function and a Tear-off function. Driver Settings 1. When in Start | Settings | Printers, right click on the IP printer. Choose Properties, then Printing preferences. Then choose Paper/ Output; paper size.

  • Page 28: Peel-Off Mode

    Figure 17, Custom Settings Dialog Box Peel-Off Mode The Brady IP Printer enables label output in Peel-off mode. In this mode, a label is printed, separated from the liner and presented to the user. The printer pauses until the label is removed. After the label is removed, the printer prints the next label and the cycle continues.

  • Page 29: Tear-Off Mode

    Label stock is loaded as described in Feeding the Label — Tear-Off Mode on page 29. After printing, the strip label is detached by hand. The Brady IP Printer is equipped with a tear bar for this purpose.

  • Page 30: Loading The Ribbon And Material

    Loading the Ribbon and Material Loading the Ribbon and Material Loading the Ribbon NOTICE Do not use a ribbon for direct thermal printing. NOTICE When inserting a ribbon, ensure that the coated side faces the labels, otherwise the printhead can become dirty. 1.
  • Page 31 Loading the Ribbon and Material 2. Push the old ribbon spindle (Figure 18, 2) slightly to the right to release tension on the spindle and pull the left side of the spindle (Figure 18, 1) toward you. Discard used ribbon. 3.

  • Page 32: Loading The Material

    There are electrical contacts located under the side tabs (Figure 20, 1) on both sides of the material supply holder. Be careful not to damage these electrical contacts or the Brady IP Printer will be unable to read the material identification tag on the labels.
  • Page 33 3. Press and hold the green tab (Figure 20, 3) on the material supply holder and slide the end piece (Figure 20, 4) outward. 4. Slide the Brady labeling material roll onto the material supply holder. Make sure material roll is installed with label printable side (up) towards printhead (Figure 20, 6).

  • Page 34: Reading The Lcd Display

    Reading the LCD Display The use of Brady-brand supplies and LabelMark, BradySoft or IdentiLab labeling software allows access to the full operation of Brady mode. For detailed information about Brady mode, refer to Brady Mode on page 14. The LCD display should read Ready and display the type of material loaded into the printer as well as the type of ribbon loaded.

  • Page 35: Feeding The Label - Peel-Off Mode

    Loading the Ribbon and Material Feeding the Label — Peel-Off Mode Figure 23, Peel-Off Mode 1. Pressure roller (engaged) 4. Label backing 2. Pressure roller (disengaged) 5. Label 3. Pressure roller 1. Load the labels on the material supply holder. Refer to Loading the Material on page 25.

  • Page 36: Feeding The Label - Tear-Off Mode

    Loading the Ribbon and Material 5. Feed the label backing (Figure 23, 4) out between the control panel and the printer. 6. Make sure that there is enough slack in the label strip so the printer can be closed without pulling the label strip backward. 7.

  • Page 37: Synchronizing The Paper Feed

    Synchronizing the Paper Feed After the label stock has been inserted, the printer will calibrate automatically if Brady IP enabled materials are used. If materials other than Brady IP enabled are used, calibration is performed manually. Select the material type in the software.

  • Page 38: Control Panel

    Control Panel Control Panel The user can control many printer operations with the control panel. These options include: Starting, interrupting, continuing and cancelling print jobs (refer to Key ■ Functions on page 36). Setting print speed, interface configuration, language and time of day (refer ■...
  • Page 39 Control Panel...
  • Page 40 Control Panel...

  • Page 41: Control Panel Structure

    (Figure 25, 2) with five integrated keys. The graphic display indicates the current status of the printer, label and/or ribbon numbers, if Brady-brand materials are used, the print job, faults and the printer settings in the menu. The key functions depend on the current printer status. The key pads (for example, menu or feed) light up white in Print mode.

  • Page 42: Printing Label' State

    Control Panel ‘Printing label’ state The printer is currently processing an active print job. Data can be transmitted for a new print job. The new print job will start when the previous one has finished. The display shows the message Printing label and the number of the printed label in the print job.

  • Page 43: Key Functions

    Control Panel Key Functions The up, down, left and right arrows are used for navigating in the menu. ■ key corresponds to the Enter key on a computer keyboard. It ■ confirms: - Selection of a menu item. - Entry of a parameter. - Help information in the event of a fault.

  • Page 44: Short Status

    Serial number of the PCB CPU #132062821190 Resolution of the installed thermal printhead 300dpi,1248dots Previously printed paper lengths Transfer 181.44 m Previously printed paper length (thermal print) Thermal 13.17 m IP address of the Brady IP Printer when 192.168.9.14 connected to a network...

  • Page 45: Test

    Control Panel Test Overview The printer is equipped with different test functions providing information about: The most important configuration parameters. ■ The fonts available in the printer. ■ The hardware components and connected peripheral devices. ■ The print image quality and state of the thermal printhead. ■...

  • Page 46: Status Print

    Control Panel Status Print The Status print function prints a test image containing information on the configuration and status of the printer. The printout occurs using the heat level and print speed specified in the Setup > Print param. menu. NOTE: Continuous media is most suitable for this function.

  • Page 47: Font List

    Control Panel Font List The Font list function prints the most important parameters of the fonts available in the printer. The table contains both the original fonts and user-loaded fonts. NOTE: Continuous media is most suitable for this function. 1. Press the menu key. 2.

  • Page 48: Device List

    Control Panel Device List The Device list function prints out the most important information on hardware components of the printer and connected devices. NOTE: Continuous media is most suitable for this function. 1. Press the menu key. 2. Select Test > Device list menu. 3.

  • Page 49: Ascii Dump Mode

    Control Panel ASCII Dump Mode ASCII Dump mode offers the option of checking incoming control sequences at the interface when working with direct programming. The incoming commands at the printer are printed out as text. In addition, a corresponding error message is printed out immediately after an error occurs. The printout is started after four lines have been received.
  • Page 50 Control Panel Figure 30, Sample ASCII Dump Mode...

  • Page 51: Test Grid

    Control Panel Test Grid The Test grid function prints out the geometric pattern on a background grid. This allows you to assess the evenness of the print quality. NOTE: Continuous media is most suitable for this function. 1. Press the menu key. 2.

  • Page 52: Label Profile

    Control Panel Label Profile The Label profile function carries out a longer label advance. It saves the values measured by the label sensor here and then prints them out in two diagrams. The printout is used to check label detection in conjunction with the optical properties of the label medium.
  • Page 53 Control Panel Figure 33, Typical Label Profile Graph Description of Label Profile Graph 1 Direction of paper flow at which the label start was detected 2 Type of peripheral device connected 3 Information for the firmware developer 4 Width of the negative derivative in motor increments 5 Stroke between start and end of the negative derivative 6 Scale factor for the derivative diagram 7 Service information for adjusting the label sensor...

  • Page 54: Setup Menu

    Control Panel Setup Menu Local Settings Press the menu key. Select Setup > Local settings. Parameter Meaning Default Country Sets the display language and the country-specific date and time formats. Timezone Adapts the time display on the printer to the time zone in relation to UTC (Universal Time Coordinated).

  • Page 55: Machine Parameters

    Control Panel Machine Parameters Press the menu key. Select Setup > Machine param. Parameter Meaning Default Printhead Shifting of the entire print image perpendicular to 0.0 mm pos. X the direction of paper flow. The absolute shifting is limited by the margins of the print zone.
  • Page 56 Control Panel Parameter Meaning Default >Backfeed Delay time between removing the label from the 250 ms delay peel position and the backfeed of the label. > Limit Limitation of the print speed in the Peel-off mode to peel-off 100 mm/s. spd.

  • Page 57: Print Parameters

    Control Panel Print Parameters Press the menu key. Select Setup > Print param. Parameter Meaning Default Heat level Heating value to compensate for different thermal behavior of printheads. Changing this value is necessary if the printing intensity has changed after replacing the printhead. To adapt the printing intensity when using different media, print speeds or printing contents, you should change the heat level in...
  • Page 58 Control Panel Parameter Meaning Default Label Method for detecting the starting end of the sensor label. Sensor Gap sensor: Detection using changes in the transparency between the label and label gap. Bottom-Reflect: Detection using reflex marks on the bottom of the material and notched material.

  • Page 59: Interfaces

    Control Panel Parameter Meaning Default Barcode On: With faulty barcode contents or size error specifications, printing is interrupted. Off: Printing is not interrupted if an error occurs. If barcode contents are faulty, the printer attempts to replace the incorrect data with valid characters (e.g.

  • Page 60: Security

    DHCP server Off: Direct issuing of the IP address by the operator > IP IP address of the Brady IP Printer. Only valid with DHCP = Off. > Mask Subnet mask (classification and address range) of the local network. Only valid with DHCP = Off.

  • Page 61: Firmware

    Firmware upd.: Copy a firmware file from a computer connected to one ■ of the interfaces of the Brady IP Printer. Refer to Firmware Update via Interface on page 54. Brady Support can provide additional information about current firmware available on the Brady website.

  • Page 62: Firmware Update From Memory Card

    Control Panel Firmware Update from Memory Card 1. Format CompactFlash memory card in printer. The directories “fonts,” “images,” “labels” and “misc” are created on the memory card. 2. Copy the firmware file to the “misc” directory in a CompactFlash drive. 3.

  • Page 63: Error Messages During Firmware Update

    Control Panel Error Messages During Firmware Update If an error occurs during the update, one of the following error codes is shown in the display: Error Meaning code Checksum error. /b may have been forgotten in the COPY command or the file is defective.

  • Page 64: Calibration For Standard Material

    Calibration for Standard Material Heat Settings for Print Darkness With the use of Brady material, the heat settings in the setup print parameters menu may vary greatly. Setting the heat excessively high can result in not only melting the ribbon but also damaging the printhead. If your material does not have a recommended heat setting, it is recommended that you set the heat at -20, which is the lowest possible value.

  • Page 65: Print Sample Label

    Control Panel Print Sample Label A sample label is imbedded in the firmware and can be printed through the test menu. Figure 34, Sample Print Label...

  • Page 66: Print Setting Label

    Control Panel Print Setting Label To validate the settings, print the configuration label. Figure 35, Configuration Label...

  • Page 67: Cleaning And Simple Maintenance

    Cleaning and Simple Maintenance Cleaning and Simple Maintenance A DANGER Electric Shock Hazard Disconnect power to the printer before starting any maintenance work. It is important to clean the thermal printhead regularly. This guarantees a consistently good printed image and will prevent premature wear of the printhead.
  • Page 68 Cleaning and Simple Maintenance CAUTION Printhead Damage • Do not use sharp objects to clean the printhead. • Do not touch the protective glass layer on the printhead. CAUTION Risk of injury from the hot printhead. Ensure that the printhead has cooled down before starting cleaning.

  • Page 69: Basic Troubleshooting Guide

    Basic Troubleshooting Guide Basic Troubleshooting Guide Troubleshooting Chart Problem Cause Remedy Transfer ribbon Transfer ribbon is too Use a transfer ribbon slightly creases. wide. wider than the width of label. Print image has Printhead is dirty. Refer to Cleaning the Printhead smears or voids.

  • Page 70: Error Messages With Corrective Actions

    Basic Troubleshooting Guide Error Messages with Corrective Actions Error messages Cause Remedy ADC malfunction Possible hardware issue. Recycle power to the printer. If the error does not clear, call service. Barcode error Barcode content is Press cancel key to return printer invalid, for example to Ready mode.
  • Page 71 Basic Troubleshooting Guide Error messages Cause Remedy Invalid setup The Setup menu is Cancel the current job. Recheck incorrectly configured. all configuration settings. Memory overflow setup Handshake mode is not Access the printer menu, handshake mode and select RTS/CTS Multiple Label Multiple tags on core of Reboot printer to get a fresh read Tags Found,...
  • Page 72 Basic Troubleshooting Guide Error messages Cause Remedy No Ribbon Supply missing RFID tag. Verify compatible supply has Detected been loaded, if supply is correct select enter to bypass the error and the printer will load primary ribbon settings for Hassle Free mode.
  • Page 73 Basic Troubleshooting Guide Error messages Cause Remedy Protocol error Printer has received an • Press the pause key to skip the unknown or invalid command. command from the computer. • Press the cancel key to cancel the print job. Ribbon too Ribbon is smaller than Install recommended larger Narrow for...

  • Page 74: Additional Support

    Additional Support Additional Support Technical Support Numbers/Online Help For Repair or Technical Assistance, find your regional Brady Tech Support office by going to: In the Americas: www.bradyid.com ■ In Europe: www.bradyeurope.com ■ In Asia: www.bradycorp.com ■ Repair and Replacement Parts Brady Corporation offers Repair and Replacement Services.

This manual is also suitable for:

Bp-ip300Ip series

Table of Contents