Table of Contents
Advertisement
Date and Time
Set the printer's clock to the current date and time. You do not need to reset the date and time after
power is removed from the printer.
1. With the printer turned on, tap Settings.
2. Tap System Configuration, then Date and Time.
The left side of the screen displays the current settings.
3. To change the settings, tap the controls on the right.
•
•
•
4. Return to the home screen.
Printer Name
The printer name is displayed when a computer searches for the printer on a Wi-Fi connection. If the
printer does not have a name the serial number will be displayed instead.
1. With the printer turned on, tap Settings.
2. Tap Connection, then Printer Name.
The printer displays a keyboard. The printer name can only contain the characters A-Z, a-z,
0-9, and a dash (-).
3. Use the keyboard on the touch screen to type a name for the printer.
4. Return to the home screen.
Advance to Next Label
Set the mode for how the printer advances to the next label in a print file.
1. With the printer turned on, tap Settings.
2. Tap System Configuration, then Advance to Next Label.
3. Choose Auto or Manual.
•
•
BradyPrinter A5500 User Manual
Use 24-hour format: Tap the switch to change between 24-hour format (green) and 12-hour
format (red) with AM and PM.
Set date: Tap to display date controls. To change the date, either tap on an element and select
a new value, or tap the arrows above or below an element.
Set time: Tap to display time controls. To change the time, either tap on an element and select
a new value, or tap the arrows above or below an element.
In Auto mode, the printer automatically advances to the next label after a print and flag cycle.
This is the typical mode of operation.
In Manual mode, you must advance the printer to the next label using the navigation buttons
on the Run (Printing) page. See
"Run" on page
28.
Installation and Preparation
Printer Settings
13
Advertisement
Table of Contents
