Feeding And Cutting Label Stock - Brady BBP 33 User Manual

Feeding and Cutting Label Stock

®
33 Sign & Label Printer User's Manual
BBP
Use this procedure to advance the media to the cut position, and (optionally) tear
or cut the media.
Note: For die-cut media, the media is advanced to the cut position which is the
next die-cut label. For continuous media, the media advances until you release
the Feed button.
To feed and tear or cut the label stock:
1. With printer power on, press and hold Feed
you want exits the printer.
2. To cut the media, follow the instructions for tearbar or cutter:
Tearbar:
• Tear the media up and across the tear bar.
Cutter:
Note: If using the printer with an auto cutter, the media is cut from the Cut
Media menu.
a. Press to go to the navigation menu.
b. Press or to scroll to Cut Media, then press
Unpack and Set up Printer
Feeding and Cutting Label Stock
until the length of media
. The media is cut.
-
2 9