Safety - Brady IP 300 Quick Start Manual

Quick Start Guide

Safety

The label printer is configured for voltages of 100 to 240 V ~ (50 to 60 Hz).
■
Connect only to a grounded power outlet.
The label printer may only be used in a dry environment, do not expose it to
■
moisture (water, mists, etc.).
If the label printer is operated with the cover open, ensure that people's
■
clothing, hair, jewelry etc. do not come into contact with the exposed
rotating parts.
During the print process, the print assembly can become hot. Do not touch
■
the print assembly during operation, and allow the assembly to cool down
before changing material and before disassembly.
Perform only those actions described in this quick operator's guide. Work
■
going beyond this may only be performed by trained personnel or service
technicians.
2
A WARNING
Entanglement Hazard
• MOVING PARTS can entangle.
• AVOID wearing jewelry or loose fitting clothing.
• ALWAYS tie back long hair.
A DANGER
Electric Shock Hazard
• DO NOT open the label printer casing.
• UNPLUG power cord before servicing.
• CONTACTING power supply can cause
electrocution.