Brady IP™ Printer Operator/Configuration
Safety and the Environment
Please read and understand this manual before using the Brady IP Printer for
the first time. This manual describes all of the main functions of the Brady IP
Printer. The functions actually available depend on the version ordered.
A detailed product description with all technical data can be found
online at www.bradyid.com, www.bradyeurope.com,
www.bradycorp.com.
About the Printer
The Brady IP printer is designed to work with BradySoft, IdentiLab or
LabelMark software. When used with one of those software packages, the
printer will automatically recognize all Brady IP enabled and compatible
materials up to 4 inches (101.6 mm) wide. For operation of the printer with
other materials, metallized labels and other software packages, refer to
Standard Mode on page 16.
Intended Use of the Printer
The Brady IP Printer is designed and manufactured in accordance with
■
applicable standards and recognized safety rules. However, danger to the
life and limb of the user or third parties and/or damage to the Brady IP
Printer and other tangible assets can arise during use.
The Brady IP Printer may only be used for its intended purpose, in perfect
■
working order and with regard to safety and dangers as stated in this
manual. In particular, faults which affect safety must be rectified
immediately.
The Brady IP Printer is intended exclusively for printing suitable materials
■
that have been approved by the manufacturer. Any other use shall be
regarded as improper use. The manufacturer/supplier shall not be liable for
damage resulting from unauthorized use; the user shall bear the risk alone.
Usage for the intended purpose also includes complying with the operating
■
manual, including the manufacturer's maintenance recommendations and
specifications.
2