Radio Operation; Manual Tuning - Alpine CVA-1000R Owner's Manual

1
2
3
4
5
22
SOURCE
x
FUNC
P.UP
z
P.DOWN
AL
DX
A.MEMO

Radio Operation

Manual Tuning

Press the SOURCE button.
The Menu screen appears.
Note: Pressing the SOURCE button while
driving (Parking Brake OFF) will cause
the audio source to change immedi-
ately. The SOURCE Selection menu
will not appear. Press the SOURCE
button repeatedly until you are in the
RADIO mode. Skip to Step 3 in this
case.
Turn the rotary switch to scroll the bottom menu
and select the RADIO menu, and move the
RADIO menu to the extreme end of right side.
Then press the rotary switch.
The radio mode is activated.
Press the rotary switch to select the desired
radio band. Each press changes the band as
follows:
FM1 FM2
Press the FUNC button. Each press changes
the Function guide menus.
Press the F1 ()) or F2 (() button to
change the radio frequency upward or down-
ward respectively. Each press changes the
frequency one step. When the button is pressed
and held, the frequency changes continuously
until the button is released.
English
FM3 MW LW