Recalling Preset Rds Stations - Alpine CVA-1000R Owner's Manual

1
FUNC
2
3
1 MONO
2 AF
4 T.INFO
5 PTY
5 P.PTY
4
1 PRESET 1
2 PRESET 2
3 PRESET 3
4 PRESET 4
5 PRESET 5
6 PRESET 6
5
RDS Operation
Recalling Preset RDS
Stations
Press the FUNC button in the radio mode.
Press the NEXT (0/) button.
The contents of the Function Guide screen
changes.
Press the F2 (AF) button to activate the RDS
mode. The display will show "AF" when the
RDS mode is activated.
Press the Function (F1 – F6) button in which
your desired RDS station is preset. If the preset
station's signal is weak, the unit automatically
searches and tunes to the strongest station in
the AF (Alternate Frequencies) list.
If the preset station and the stations in the AF
list cannot be received:
The unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the
area, the unit displays the frequency of the
preset station.
If the signal level of the Regional (Local) station
being tuned becomes too weak to receive, press
the same preset location button to tune in a
Regional station in other district.
Note: For presetting the RDS stations, refer to
the Radio Operation section. The RDS
stations can be preset in the F1, F2 and
F3 bands only.
English English
31