Adjusting The Monitor Viewing Angle - Alpine CVA-1000R Owner's Manual

1
10
Basic Operation
Adjusting the Monitor
Viewing Angle
The monitor's angle can be adjusted for easier
viewing.
Press the ANGLE
the monitor's angle so the screen will be in the
best viewing position. Each press of the buttons
produces a beep and changes the screen
angle by 1 step. The screen angle has 4
positions between 84 and 104 degrees.
Notes: If the monitor touches an obstacle
while the angle is being adjusted the
unit will beep for 2 seconds and stop
the screen immediately.
Should this happen, remove the
obstacle and press the
button again.
The screen colour will vary when
viewed at certain angles. Adjust the
screen angle for the best viewing
position.
If the voltage of the vehicle's battery
power is low, the screen may blink.
This is not a malfunction.
English
and buttons to adjust
or