Adjusting Time - Alpine CVA-1000R Owner's Manual

1
2
Divider
CONT.
PSET
Custom
C H STEP
F-High/R 30 ms
L
30 F 30 R 30 ms
R
30 F 30 R 30
vol. 35
DN
3
4
FUNC
X-OVER/
LEVEL/
T-CR/
P.UP
P.DOWN
RTN UP
Audio Processor
Operation

Adjusting Time -

Correction for 2-Way
Speaker System
Use this procedure to adjust the sound time
difference between the speakers.
Display the DIV. cont. screen. Press the FUNC
button.
The contents of the Function Guide screen
changes.
Select the frequency range you want to adjust.
When the F3 (T-CR) button is pressed once,
the display shows the adjustment value of the
T-CR (Time-Correction).
Each press changes the frequency ranges as
follows:
When only one divider is connected
L-Low R-Low
R-High/R R-High/L
When two dividers are connected
L-Low R-Low
The Time Correction mode is activated and the
DN/RTN/UP menu is displayed.
Turn the rotary switch clockwise or
counterclockwise to adjust the time correction
value upward or downward respectively.
To adjust other frequency ranges, follow Steps
2 and 3 above.
When the adjustments have been completed,
press the rotary switch.
English
F-High/L
F-High/R
L-High R-High
73