Adjusting Tint Of Picture - Alpine CVA-1000R Owner's Manual

1
2
3
4
5
20
SET UP
x
1 BACKGND
2 BRIGHT
3 TINT
4
COLOR
Basic Operation

Adjusting Tint of Picture

Tint adjustment can be made in the AUX1
(NAV.) or AUX2 mode.
If the unit is set in the PAL system position, this
adjustment cannot be performed.
Activate the AUX1 (NAV.) or AUX2 mode by
referring to Steps 1 and 2 for "Adjusting
Brightness of Picture."
Then press the SET UP button. The Set Up
screen appears.
Turn the rotary switch and select the Visual
cont. menu. Then press the rotary switch.
The screen changes to the Visual cont. screen.
Press the F3 (TINT) button.
The tint adjustment mode is activated and the
DN/RTN/UP menu is shown.
Turn the rotary switch to adjust to the desired
tint.
When the Tint adjustment is complete, press
the rotary switch.
English