Adjusting Source Signal Levels - Alpine CVA-1000R Owner's Manual

1
2
FM LEVEL
TA VOL
REGI
vol. 0
3
16
R D S
PREF.
FM LEVEL
TA VOL.
HIGH
REGIONAL
OFF LEVEL 4
PTY31
PTY31
OFF ON
RETURN
Basic Operation
Adjusting Source Signal
Levels
If the difference in volume levels between the
FM radio and other source is too great, adjust
the FM signal level as follows.
Press and hold the Power button for at least 2
seconds.
The initial settings for RDS screen appers.
Press the F1 (FM LEVEL) button to select the
FM signal level HI (High) or LO (Low) to make
the signal levels between the FM band and
other source closer.
Press the rotary switch to end the FM signal
level adjustment mode.
English