Radio Operation - Alpine 7525R Owner's Manual

@ RADIO OPERATION
Tuning Band Selection
Signal Strength
Station Frequencies
FM Stereo/Monaural Switching (7525R only)
Manual and Auto Seek Tuning
Stations can be tuned in using the procedures described below.
1.
Select the tuning band (FM1, FM2, MW or LW) with the BAND
button 2. The Band
indicator shows your selection.
an —> F2 <> MW ee
2. Decreasing the frequency:
The frequency is decreased by one step each time the DN switch © is pressed.
By pressing and holding the switch for at least 0.5 seconds, the unit will automatically
tune the first station it finds in the direction of decreasing frequency.
3. Increasing the frequency:
The frequency is increased by one step each time the UP switch @ is pressed.
By pressing and holding the switch for at least 0.5 seconds, the unit will automatically
tune to the first station it finds in the direction of increasing frequency.
12