Adjusting Brightness Of Picture - Alpine CVA-1000R Owner's Manual

1
2
3
4
18
SOURCE
x
SET UP
x
Basic Operation
Adjusting Brightness of
Picture
Press the SOURCE button.
The menu screen appears.
Note: Pressing the SOURCE button while
driving (Parking Brake OFF) will cause
the audio source to change immedi-
ately. The SOURCE Selection menu
will not appear. The Brightness control
can also be accessed by pressing the
SET UP button and going directly to the
VISUAL screen. The Parking Brake
must be ON to access the SET UP
screen. Trying to access this screen
while driving will display the warning -
CAN'T OPERATE WHILE DRIVING.
Turn the rotary switch and select the AUX1
(NAV.) or AUX2 menu, then press the rotary
switch.
The AUX1 (NAV.) or AUX2 mode will be
activated.
Press the SET UP button.
The Set Up screen appears.
Turn the rotary switch and select the Visual
cont. menu, then press the rotary switch. The
screen changes to the Visual Control screen.
English