Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 189

No. Trap Name
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
36 lnkaggPortJoin
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
37 lnkaggPortLeave
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
38 lnkaggPortRemove
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
39 monitorFileWritten
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
monitorFileName—The name of the file in which the traffic will be stored (the default is
"PMONITOR.ENC").
monitorFileSize—The number of bytes in 16K (16384) increments allowed for the file (default 16384 bytes).
The file contains only the last monitorFileName bytes of the current port monitoring instance.
40 alaVrrp3TrapProtoError
alaVrrp3TrapProtoErrReason—This indicates the reason for protocol error trap.
41 alaVrrp3TrapNewMaster
alaVrrp3OperMasterlpAddrType—This specifies the type of alaVrrp3OperMasterlpAddr in this row.
alaVrrp3OperMasterlpAddr—The master switch's real (primary for vrrp over IPv4) IP address. This is the Ip
address listed as the source in the advertisement last received by this virtual switch. For IPv6, a link local
address.
alaVrrp3TrapNewMasterReason—This indicates the reason for NewMaster trap.
OmniSwitch AOS Release 7 Switch Management Guide
Objects Family
traplnkaggId linkaggre-
traplnkaggPor- gation
tIfIndex
traplnkaggId linkaggre-
traplnkaggPor- gation
tIfIndex
traplnkaggId linkaggre-
traplnkaggPor- gation
tIfIndex
mirmonPrima- pmm
rySlot
mirmonPrima-
ryPort
monitorFile-
Name
monitorFileSize
alaVrrp3TrapPr vrrp
otoErrReason
alaVrrp3OperM vrrp
asterlpAd-
drType
alaVrrp3OperM
asterlpAddr
alaVrrp3TrapNe
wMasterRea-
son
March 2011
SNMP Traps Table
Description
This trap is sent when any given
port of the link aggregate group
goes to the attached state.
This trap is sent when any given
port detaches from the link
aggregate group.
This trap is sent when any given
port of the link aggregate group
is removed due to an invalid con-
figuration.
A File Written Trap is sent when
the amount of data requested by
the user has been written by the
port monitoring instance.
The error trap indicates that the
sending agent has encountered
the protocol error.
The newMaster trap indicates
that the sending agent has transi-
tioned to Master state.
page B-11