File And Directory Management - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Managing System Files

File and Directory Management

A number of CLI commands allow you to manage files on your switch by grouping them into sub-
directories within the switch's flash directory. For documentation purposes, we have categorized the
commands into the following three groups.
•
Directory commands allow you to create, copy, move, remove, rename, and display directories.
•
File commands allow you copy, secure copy, edit, rename, remove, change, and display file attributes.
•
Utility commands display memory and system diagnostic information.
The following illustration represents a sample flash directory. The sample directories hold various files.
This sample flash directory is used in the explanations of the directory, file and utility CLI commands
described in the following section.
The switch may show files and directories different from the ones shown in this example.
swlog.0
swlog.1
Working Directory
Ros.img
Reni.img
file1.txt
file2.txt
To list all the files and directories in your current directory, use the
of the flash directory.
OmniSwitch AOS Release 7 Switch Management Guide
Sample Flash Directory
Flash Files
boot.cfg
boot.params
Network Directory
Certified Directory
Ros.img
Reni.img
ls command. Here is a sample display
March 2011
File and Directory Management
policy.cfg
file1.txt
file2.txt
boot.cfg
boot.params
page 2-5