Verifying Ntp Configuration - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Configuring Network Time Protocol (NTP)

Verifying NTP Configuration

To display information about the NTP client, use the show commands listed in the following table:
show ntp status
show ntp server client-list
show ntp client server-list
show ntp keys
For more information about the resulting displays from these commands, see the "NTP Commands" chap-
ter in the OmniSwitch CLI Reference Guide.
Examples of the show ntp client, show ntp server status, and show ntp client server-list command
outputs are given in the section
OmniSwitch AOS Release 7 Switch Management Guide
Displays information about the current client NTP configuration.
Displays the basic server information for a specific NTP server or a list
of NTP servers.
Displays a list of the servers with which the NTP client synchronizes.
Displays information about all authentication keys.
"NTP Quick Steps" on page
March 2011
Verifying NTP Configuration
10-3.
page 10-13