Door Release [Door Release]; Transferring A Door Call To A Sub Master Station [Room Call] - Aiphone JM-4MED Operation Manual

Door release [DOOR RELEASE]

Door release can be activated during a call-in, communication,
or while monitoring a door station.
Release a door when
*
•
If is grayed out (disabled), check [DOOR
RELEASE], and change if needed. ( → P. 14)
•
It may not be possible to enable
RELEASE] if it is set to be disabled by the [INSTALL]
menu.
Touch either 1 or
The door lock is released for the set door release time.
If the door release time is set to "MOMENTARY" in the
*
[INSTALL] menu during installation, it will be released for as
long as the button is held.
CAUTION:
Always confi rm visitor identity if the door station has no camera.
When using JM-DVF-L, a video door station (guidance-
enabled type)
JM-DVF-L has an output for door release etc. When receiving
a call from or communicating with JM-DVF-L, touching
or releases the door lock device etc. connected with
2
the JM-DVF-L for the set door release time.
Transferring a door call to a sub master
station [ROOM CALL]
You can transfer a call received from a door station to a single
or all sub master stations while communicating with it.
1
While talking with the door station, touch
ROOM CALL .
22
is displayed on the screen.
at [DOOR
2 to release door.
MENU
2
Select desired sub master station, or touch
ALL CALL to transfer the call to all sub master
stations.
Communication with the door station is suspended while
*
forwarding call to sub master stations.
Your speaking is heard and the image of the door station is
displayed on the target sub master station(s).
3
When someone touch
the target sub master station (or one of the target
stations), talking begins with the target station side.
4
Say that you will transfer the call from a door station to
the target station, and then touch END .
At the same time, the communication between you and the
door station ends.
5
When someone touches
the target station, he (or she) can talk with the door
station side.
If handset is lifted in step
*
handset again to talk with the door station side.
1
Priority of actions
The order of priority for two or more actions
(communication, calling, monitoring, etc.) performed at the
same time is as follows.
Priority
1 (high)
2
3
→
4
5
6
7
8 (low)
Later call from a door station has priority over earlier
*
call from another door station.
When this station is receiving a call from a sub master
station, other sub master stations cannot be used.
You can call and talk to all or a single sub master
*
station while communicating with a door station.
Later monitoring has priority over earlier one.
*
TALK or lift handset on
TALK or lifts handset on
3, hang up once and then lift
Action
Triggering alarm (SECURITY)
Triggering alarm (OPTION) (when "ALARM AT
DOOR" is set to "ENABLE")
Communication with another station
Receiving a call from a door station
Calling all or a single sub master station
Triggering alarm (OPTION) (when "ALARM AT
DOOR" is set to "DISABLE")
Monitoring
Playing images