Table of Contents
Advertisement
2-3
Door release
1
Press the [
] button while in communication with the entrance sta-
tion.
2-4
Light control
Turning the entrance light on (when light is installed in common area)
1
Press the [
GUARD] button once during entrance station calling,
communication, or monitoring.
2-5
Doctor call
When the specified residence is called using Doctor call (automatic en-
try), the electric lock is automatically released without a door release op-
eration from the residential station.
1
In the standby mode, press the [
[
TALK] button. Press the button once more to reset the Doctor
call function.
• When Doctor call is enabled, the TONE OFF LED blinks with a medium
interval.
2
Press CALL button of the entrance station to unlock a door without a
door release operation from the residential station.
GUARD] button while pressing the
2
Door release is activated at the entrance station.
• If the station has a camera, the door release will also activate during calling.
Depending on the electric door release system that you use, door re-
lease may be active only while the door release button is pressed.
2
The outside light at the entrance will only turn on for the preset dura-
tion of time.
This function is not available if a surveillance camera is installed in
the common area.
3
The residential station for which the Doctor call function is set is
called. Press the [
TALK] button as necessary to respond.
NOTES: When Doctor call is enabled, the TONE OFF LED function cannot be
used. (It is possible to turn the call tone off.)
When calls are transferred to the security guard station, door release with
Doctor call is not possible.
This function may not be operated due to the equipment being used.
- 6 -
Hide quick links:
Advertisement
Table of Contents
