Aiphone JK-1HD Installation And Operation Manual

Aiphone JK-1HD Installation And Operation Manual

Hands free color video intercom

Advertisement

FK1473 Ⓐ P0109YI
JK-1HD
HANDS FREE COLOR VIDEO INTERCOM
SUB MONITOR STATION
INTERPHONE VIDEO COULEUR MAINS LIBRES
MONITEUR SECONDAIRE
VIDEO INTERCOMUNICADOR A COLOR MANOS LIBRES
MONITOR SECUNDARIO
HANDENVRIJE KLEURENVIDEOFONIE
MONITOR-BIJPOST
VIDEOCITOFONO A COLORI A VIVAVOCE
POSTAZIONE DI MONITORAGGIO SECONDARIA
JK-1HD
Sub monitor station
Moniteur secondaire
Monitor secundario
Monitor-bijpost
Postazione di monitoraggio
secondaria
INSTALLATION & OPERATION MANUAL
MANUEL D'INSTALLATION ET D'UTILISATION
MANUAL DE INSTALACIÓN Y OPERACIÓN
INSTALLATIE- EN BEDIENINGSHANDLEIDING
MANUALE D'INSTALLAZIONE E USO

Advertisement

Table of Contents
loading

Summary of Contents for Aiphone JK-1HD

  • Page 1 FK1473 Ⓐ P0109YI JK-1HD HANDS FREE COLOR VIDEO INTERCOM SUB MONITOR STATION INTERPHONE VIDEO COULEUR MAINS LIBRES MONITEUR SECONDAIRE VIDEO INTERCOMUNICADOR A COLOR MANOS LIBRES MONITOR SECUNDARIO HANDENVRIJE KLEURENVIDEOFONIE MONITOR-BIJPOST VIDEOCITOFONO A COLORI A VIVAVOCE POSTAZIONE DI MONITORAGGIO SECONDARIA JK-1HD...
  • Page 2: Package Contents

    3. When mounting the unit on a wall, install the unit in a convenient location, but not where it could be jarred or bumped. Injury could result. 4. For power supply, use Aiphone power supply model or model specified for use with system. If non-specified product is used, fire or malfunction could result.
  • Page 3: Installation

    (x2) Never use individual conductors, twisted pair cable or coaxial cable. The sub monitor station has switches on both sides. Allow at least 5 cm (2") of open space on either side. JK-1HD + 5 cm (2") JK-1HD IER-2 When using a cable with unused conductors, terminate both ends of the unused pair(s) with a 120 Ω...
  • Page 4 MOUNTING Back wiring JK-1HD 1. Press RELEASE button (to insert or remove the wire). 2. Insert the cable into the terminal. Surface wiring * When a 1-gang box is not mounted, the cable can be surface-run to the top or bottom of the unit.
  • Page 5 18V DC 100V - 240V - P: Polarized 50/60 Hz - 5 - JK-1MED/1MD JK-1HD PS18 PS18 When the JK-1HD is connected, split power between the master station and the sub master station if radio signals are picked up during communication.
  • Page 6 NAMES JK-1HD POWER switch Speaker Color LCD video monitor Microphone Door release LED (red) DOOR RELEASE button ZOOM/WIDE button ADJUST button PAN/TILT button CALL button Option button (*) Transmit LED (red) TALK button OFF button MONITOR button (*) The option button controls connected option units such as turning lighting on and off and activation of added door releases.
  • Page 7 OPERATIONS 6-1 Answering a door call (HANDS-FREE mode, PTT mode) Press CALL button. Chime tone sounds, caller is seen on video monitor, and outside sound is heard. • Audio and video turns off after approximately 45 seconds if not answered. Press TALK button momentarily, and after the beep, communicate hands free.
  • Page 8: Entrance Monitoring

    6-3 Entrance monitoring Press MONITOR button in the standby mode. The video monitor displays the image from the door station and the incoming audio is heard. If you do not press caller will not hear sounds from the inside station. 6-4 Room-to-room communication Press CALL button to talk with the other person.
  • Page 9: Pan/Tilt Operation

    6-6 Pan/tilt operation When a zoom picture is displayed, press the [ ] [ ] [ ] and [ ] buttons. • [ ]: Up • [ ]: Down • [ ]: Left • [ ]: Right • Moving diagonally is also possible. 6-7 Night illumination At night, the door station Illuminator LED lights up during calling or communication.
  • Page 10: Technical Precautions

    6-8 Backlight adjustment, Night sensitivity adjustment To perform adjustment Press ADJUST button when the screen is difficult to see. • Automatic adjustment to a more visible screen is performed. <Day> <Night> [Before adjustment] [Before adjustment] [After adjustment] [After adjustment] 6-9 If optional units are installed When a separately-installed sensor detects a malfunction or CALL button is pressed, the alarm sound occurs and the transmit LED (red) flashes.
  • Page 11: Warranty

    Aiphone garantiza que sus productos no tienen defectos de material ni de mano de obra bajo condiciones de uso normal durante dos años tras su entrega al usuario final. Aiphone realizará la reparación o cambio libre de costo si el producto está defectuoso y la garantía se aplica al defecto. AIPHONE se reserva el derecho de tomar la decisión final de si hay o no defectos de material y/o de mano de obra, y de si el producto está...
  • Page 12 Increase the separation between the equipment and receiver. ・Consult the dealer or an experienced radio/TV technician for help. http://www.aiphone.com/ AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE...

Table of Contents