Door Release; Light Control; Doctor Call - Aiphone GT-1C7-L Operation Manual

1-3

Door release

1
Press the [ ] button while in communication with the entrance
station.
GT-1C7-L/GT-1C7
1-4

Light control

Turning the entrance light on (when light is installed in common area)
1
Press the [ ] button once during entrance station calling,
communication, or monitoring.
GT-1C7-L/GT-1C7
1-5

Doctor call

When the specified residence is called using Doctor call (automatic
entry), the electric lock is automatically released without pressing the
door release button at the residential/tenant station.
1
In the standby mode, press the [ ] button while pressing the
[ ] button. Press both buttons once more to reset the Doctor
call function.
GT-1C7-L/GT-1C7
2
Press CALL button at the entrance station to unlock the door
without pressing door release button at the residential/tenant
station.
2
GT-1M3-L/GT-1M3
2
GT-1M3-L/GT-1M3
3
GT-1M3-L/GT-1M3
- 7 -
Door release is activated at the entrance station.
• If calling from a video entrance station, door release can be activated
without answering.
NOTE: If door release output from GT system is connected to an access
control system, door release will be activated based on the access
control settings.
The light at the entrance will only turn on for the preset duration
of time.
NOTE: This function is not available if a surveillance camera is installed in
the common area. (Refer to section 4-5.)
The residential/tenant station for which the Doctor call function
is set will be called. Press the [
answer.
GT-1C7-L/GT-1C7
NOTE: When calls are transferred to the security guard station, door release
with Doctor call is not possible.
USING THE STATION
] button as necessary to
GT-1M3-L/GT-1M3