Table of Contents
Advertisement
Copyright Agilent Technologies, Inc.
©
2003, 2005, 2007
No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior agreement and
written consent from Agilent Technolo-
gies as governed by the United States
and international copyright laws.
Manual Part Number
33220-90002, May 2007
(order as 33220-90100 manual set)
Edition
Edition 4, May 2007
Printed in Malaysia
Agilent Technologies, Inc.
3501 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
Assistance
Product maintenance agreements and
other customer assistance agreements
may be available. Contact your nearest
Agilent Sales and Service Office or visit
www.agilent.com/find/assist.
Trademark Information
®
®
Microsoft
and Windows
are U.S.
registered trademarks of Microsoft
Corporation.
Certification
Agilent Technologies certifies that this
product met its published specifications
at the time of shipment from the factory.
Agilent Technologies further certifies
that its calibration measurements are
traceable to the United States National
Institute of Standards and Technology,
to the extent allowed by that organiza-
tion's calibration facility, and to the
calibration facilities of other Interna-
tional Standards Organization members.
Technologies Licenses
The hardware and/or software described
herein are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Warranty
The material contained in this docu-
ment is provided "as is," and is subject
to being changed, without notice, in
future editions. Further, to the maxi-
mum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied with regard to
this manual and any information con-
tained herein, including but not limited
to the implied warranties of merchant-
ability and fitness for a particular
purpose. Agilent shall not be liable for
errors or for incidental or consequential
damages in connection with the fur-
nishing, use, or performance of this
document or any information contained
herein. Should Agilent and the user
have a separate written agreement with
warranty terms covering the material
in this document that conflict with
these terms, the warranty terms in the
separate agreement will control.
Restricted Rights Legend
U.S. Government Restricted Rights.
Software and technical data rights
granted to the federal government
include only those rights customarily
provided to end user customers.
Agilent provides this customary
commercial license in Software and
technical data pursuant to FAR 12.211
(Technical Data) and 12.212 (Computer
Software) and, for the Department of
Defense, DFARS 252.227-7015
(Technical Data - Commercial Items)
and DFARS 227.7202-3 (Rights in
Commercial Computer Software or
Computer Software Documentation).
Safety Notices
Do not defeat power cord safety ground
feature. Plug in to a grounded outlet.
Do not use product in any manner not
specified by the manufacturer.
Do not install substitute parts or per-
form any unauthorized modification to
the product. Return the product to an
Agilent Technologies Sales and Service
Office for service and repair to ensure
that safety features are maintained.
WARNING
A WARNING notice denotes a hazard.
It calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions are
fully understood and met.
C A U T I O N
A CAUTION notice denotes a hazard.
It calls attention to an operating proce-
dure, practice, or the like that, if not
correctly performed or adhered to,
could result in damage to the product or
loss of important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully understood
and met.
Symbols
Earth ground
Chassis ground
Risk of electric shock
Caution. Refer to
accompanying
documentation
W A R N I N G
Main power disconnect: Unplug
product from wall outlet and remove
power cord before servicing. Only quali-
fied, service-trained personnel should
remove the cover from the instrument.
For continued protection against fire,
replace the line fuse only with a fuse
of the specified type and rating.
C A U T I O N
The Output, Sync, and Modulation
In connector shields are allowed to float
±
at
42 V (peak) relative to earth
ground. However, these shields are all
connected to each other through inter-
nal circuitry. Attempting to drive them
to different potentials can result in high
currents that may damage your
instrument.
Advertisement
Table of Contents
