HP 53131A/132A 225 MHz Programming Manual page 4

Copyright Hewlett-Packard
Company 1996
All Rights Reserved.
Reproduction, adaptation, or
translations without prior
written permission is
prohibited, except as allowed
under the copyright laws.
Printed: November 1996
Printed in USA
Manual part number
53131-90044
Hewlett-Packard Company
Santa Clara Division
5301 Stevens Creek Boulevard
Santa Clara, California 95052-8059
Certification
and Warranty
Certification
Hewlett-Packard Company
certifies that this product met
its published specification at
the time of shipment from the
factory. Hewlett-Packard
further certifies that its
calibration measurements are
traceable to the United States
National Institute of Standards
and Technology (formerly
National Bureau of
Standards), to the extent
allowed by the Institute's
calibration facility, and to the
calibration facilities of other
International Standards
Organization members.
Warranty
This Hewlett-Packard
instrument product is
warranted against defects in
material and workmanship for
a period of three years from
date of shipment. During the
warranty period, Hewlett-
Packard Company will, at its
option, either repair or replace
products which prove to be
defective.
For detailed warranty
information, see back matter.
Safety Considerations
General
This product and related
documentation must be
reviewed for familiarization
with this safety markings and
instructions before operation.
This product is a safety Class I
instrument (provided with a
protective earth terminal).
Before Applying Power
Verify that the product is set to
match the available line
voltage and the correct fuse is
installed. Refer to instructions
in Chapter 1 of the Manual.
Safety Earth Ground
An uninterruptible safety earth
ground must be provided from
the mains power source to the
product input wiring terminals
or supplied power cable.
Warning Symbols That May
Be Used In This Book
Instruction manual symbol;
the product will be marked
with this symbol when it is
necessary for the user to refer
to the instruction manual.
Indicates hazardous voltages.
Safety Considerations
(contd)
Indicates earth (ground)
terminal.
or
Indicated terminal is
connected to chassis when
such connection is not
apparent.
Indicates Alternating
current.
Indicates Direct current.
WARNING
BODILY INJURY OR
DEATH MAY RESULT
FROM FAILURE TO
HEED A WARNING. DO
NOT PROCEED BEYOND
A WARNING SIGN UNTIL
THE INDICATED
CONDITIONS ARE FULLY
UNDERSTOOD AND MET.
CAUTION
Damage to equipment, or
incorrect measurement data,
may result from failure to heed
a caution. Do not proceed
beyond a CAUTION sign until
the indicated conditions are
fully understood and met.
For additional safety and
acoustic noise information,
see back matter.