Table of Contents
Advertisement
Chapter 2 Command Summary
Front Panel to SCPI Command Maps
MEASURE Keys to SCPI Command Map (Cont.)
1
a.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]FREQuency [1 | 2 | 3] "
b.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]FREQuency:RATio
[1,2 | 1,3 | 2,1 | 3,1] "
2
a.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]TOTalize [1] "
b.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]PHASe [1,2] "
c.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]DCYCle [1] "
d.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]VOLTage:MINimum [1] "
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]VOLTage:MAXimum [1] "
e.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]VOLTage:MINimum 2 "
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]VOLTage:MAXimum 2 "
3
a.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]TINTerval [1,2] "
b.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]PERiod [1] "
c.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]RISE:TIME [1] "
d.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]FALL:TIME [1] "
e.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]PWIDth [1] "
f.
[:SENSe]:FUNCtion[:ON] " [:][XNONe:]NWIDth [1] "
Since the primary purpose of these front-panel keys is to change the function, the
corresponding [:SENSe]:FUNCtion[:ON] command is listed in the menu map
above. The front-panel keys, however, invoke couplings which affect other
settings, whereas the [:SENSe]:FUNCtion[:ON] command does not.
Figure 2-3. MEASURE Keys to SCPI Command Map (Part 2 of 2)
Programming Guide
OR
OR
2-9
Advertisement
Table of Contents
