Table of Contents
Advertisement
Chapter 4 Command Reference
Introduction
:INPut[1|2]:FILTer[:LPASs]:FREQuency?
Queries the cutoff frequency of the low-pass filter.
Query Response
Comments
Units are Hertz.
:INPut[1|2]:IMPedance <numeric_value> [OHM]
Sets or queries the input impedance (50 or 1M ).
<numeric_value>
50 or 1E6
Range
Query Response
Numeric data transferred as ASCII bytes in <NR3> format with six significant
digits.
Comments
Related
50 /1M
Front-Panel
Keys
Programming Guide
Numeric data transferred as ASCII bytes in <NR3> format with six
significant digits.
A value of 100E+3 is returned.
*RST: 1E6 OHM
Units are Ohms.
4-49
Advertisement
Table of Contents
