Default Settings; Changing Limit Of Use - Olivetti d-Copia 200MF Advanced Information

Changing Limit of Use

ADVANCED OPERATION GUIDE
4 Press or to select the ID-
code to delete and press [Enter].
A confirmation screen displays.
Press or to select Yes and
press [Enter].
To delete another account, repeat
the procedure.
5
On completion, press
select End and press [Enter].
Use to change the Limit of use that has been setup.
NOTE:
To set the limit of use in managing accounts, you must set Copy
Job Accounting and Printer Job Accounting to On. If the optional Network
Scanner kit or Fax kit is installed, set Scanner Job Accounting or Fax Job
Accounting to On, refer to Default Settings, on page 4-12.
1
Display the Job Accounting screen, refer to Access the Job Accounting
Screen, on page 4-3.
2
Press or to select Edit Job
Accounting and press [Enter].
3
Press or to select Change
limit in use and press [Enter].
4
Press or to select the ID-
code to change and press
[Enter].
Change the limit.
5
On completion, press
select End and press [Enter].
Delete:
End
11111111
22222222
Delete?
Yes
No
or to
Delete:
End
22222222
33333333
Job Accounting:
Each Job Accounting TL
Edit Job Accounting
Job Accountg Def. Set.
Edit Job Accounting:
New registration
Delete
Change limit in use
Change limit in use:
End
11111111
22222222
or to
Change limit in use:
End
11111111
22222222
Job Accounting
: 123.456
: 000.234
: 000.234
: 006.101
[ On ]
: 123.456
: 000.234
: 123.456
: 000.234
4-9