Form Feed Timeout; Received Data Dump - Olivetti d-Copia 200MF Advanced Information

Form Feed Timeout

Received Data Dump

ADVANCED OPERATION GUIDE
If this machine does not receive any information indicating the end of data
after receiving the last data, the machine waits for a certain time without
printing the last page. When the preset time elapses, the machine
automatically performs a form feed. If you set the time to 0, the machine
does not perform a form feed until GO is manually selected.
1
Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2 Press or to select Form
Feed Time Out and press [Enter].
3
Press < or > to set the time, 0 to
495 seconds in 5 second
increments can be selected.
Press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
You can print data received as hexadecimal codes for debugging
programs and files.
1
Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2
Press or to select Print HEX-
DUMP and press [Enter].
3
Press or to select OK and
press [Enter].
Waiting displays and then the
Printer Basic screen.
4
Send data to the printer, dump pages are printed.
5
Press or to select GO and press [Enter].
6
Press [Reset]. The Printer Basic screen displays.
Printer Settings
Others
Back
Form Feed Time-Out
Print HEX-DUMP
Form Feed Time-Out
30 sec. (0
Others
Back
Form Feed Time-Out
Print HEX-DUMP
Print HEX-DUMP
Back
OK
495)
2-49