Printer Function Resetting; Resource Protect Mode - Olivetti d-Copia 200MF Advanced Information

Printer Settings

Printer Function Resetting

Resource Protect Mode

2-50
This function resets the printer's temporary settings (such as the current
page orientation and font) to the default settings.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2
Press or to select Printer
Reset and press [Enter].
3 Press or to select OK and
press [Enter].
The printer functions are reset.
The Resource Protect Mode protects the resource data such as
downloaded fonts and macros and memorizes the PCL resources even if
the emulation mode is switched off. If you select Permanent, temporary
resources are not protected. If you select Perm/Temp, temporary
resources are protected.
1 Display the Others screen, refer to Access the Others Screen, on page 2-
48.
2
Press or to select Resource
Prot and press [Enter].
3 Press or to select Off,
Permanent or Perm/Temp and
press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Others
Form Feed Time-Out
Print HEX-DUMP
Printer Reset
Printer Reset
Back
OK
Others
Print HEX-DUMP
Printer Reset
Resource Prot.
Resource Prot.
Back
Off
Permanent
ADVANCED OPERATION GUIDE