Job Accounting Mode - Olivetti d-Copia 200MF Advanced Information

Job Accounting

Job Accounting Mode

Job Accounting
Managing Accounts
All Account
Management
Individual Account
Management
Enabling Job
Accounting
Default Settings
4-2
Use Job Accounting mode to control the total number of copies and prints
by setting an ID-code for each account.
Job Accounting mode has the following features.
• Controls the Copy functions, printer functions, and optional scanner/
fax functions using ID-codes.
• Controls up to 100 accounts.
• ID-codes can have up to eight digits.
• Counts the number of copies for all accounts and individual accounts.
• You can limit of number of sheets up to 999,999 in 1 sheet increments.
• You can clear the counter for all accounts and individual accounts.
The following functions are available in the Job Accounting mode.
mode
• Registration — Registers ID-codes and limit of
use. Up to 100 ID-codes can be registered.
• Deletion — Deletes registered accounts.
• Change of limit of use — Changes the limit of
use for each account.
Viewing the total count, printing a Job Accounting
report, and counter clear for all accounts can be
performed.
Counting of the total count and counter clear for
individual accounts can be performed.
Switching the Job Accounting function On or Off.
Adjusting the default settings for Job Accounting
mode.
NOTE:
For settings on the computer required for using Job Accounting
concerning the printer functions, refer to the KX Printer Driver Operation
Guide.
NOTE:
In addition, the Job Accounting mode that can be set from the
computer is available. For details, refer to the KM-NET for Accounting
Operation Guide.
Description
ADVANCED OPERATION GUIDE
Reference
page
4-4
4-10
4-10
4-11
4-12