Network Setting - Olivetti d-Copia 200MF Advanced Information

Printer Settings

Network Setting

2-12
Mode
Nibble (high) High speed data communication is used in compliance with
the IEEE 1284 standard.
NOTE:
Use a parallel interface cable that complies with the IEEE 1284
standard.
1
Display the Interface screen, refer to Access the Interface Screen, on page
2-11.
2
Press or
and press [Enter].
3
Press or
transmission/reception mode
required and press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
To perform network printing, network setup is required. This section
describes the tasks required for using the network function.
NOTE:
Before setting the IP Address, ask your Network Administrator to
obtain the address and prepare it.
NetWare
Set this option to On if connecting to a NetWare network.
1
Display the Interface screen, refer to Access the Interface Screen, on page
2-11.
2 Press or
and press [Enter].
3
Press or
and press [Enter].
Description
to select Parallel
Interface
to select the
Parallel
to select Network
Interface
to select NetWare
Network Setting
Back
Parallel
Network
Back
Auto
Normal
Back
Parallel
Network
Back
NetWare
TCP/IP
ADVANCED OPERATION GUIDE