Postscript Problems - NEC SuperScript 1800 User Manual

P S P
OST CRIPT ROBLEMS
Problem
A PostScript file • Make sure the Superscript 1800
PostScript driver is selected as
is not printed
your default printer
• Make sure the total memory
installed is at least 12MB. Find
this out by printing a
configuration page (see Chapter
5).
The Error • Open the Properties of PS driver.
Messages (This
• Click on PostScript.
job contains
• Click on the Advanced button.
binary data...)
• The pure binary data is not
are printed.
supported. Choose the others.
(For Macintosh • Make sure that the printer is
User) turned on.
Your printer
• Check that the LocalTalk cable is
name does not
completely plugged into both the
appear on the
printer and the Macintosh.
chooser dialog
box.
• Open the PS driver Properties
The 2nd
Cassette Tray dialog.
(Tray 3) is
• Click on the Device Options tab.
installed but
• In the Change setting for
cannot be
Optional Cassette field select
selected in the
Installed .
driver
Solution

PostScript Problems

105