Janome 1200D Instruction Book page 47

FLATLOCK 2
Select 5 and set up the machine.
The needle and lower looper threads form a stitch that
can be pulled flat.
Common Uses
• Garment construction on undergarments.
• Hemming technique.
Thread in the following sequence:
1 Green (G) thread path for lower looper (page 68)
2 Yellow (B2) thread path for R1 needle (page 63)
OVERCAST 2
Select 5 and set up the machine.
The needle and lower looper threads form an edge
finish that is lightweight and flat.
Common Uses
• Finish an open seam edge on lightweight fabrics.
Thread in the following sequence:
1 Green (G) thread path for lower looper (page 68)
2 Yellow (B2) thread path for R1 needle (page 63)
46