Table of Contents
Advertisement
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
TCP/IP Setup:
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Follow the instructions in the following table on how to configure the DHCP fields.
FIELD
DHCP Setup
DHCP If set to Server, your Prestige can assign IP addresses, an IP
Client IP Pool Starting
Address
Size of Client IP Pool This field specifies the size or count of the IP address pool.
Primary DNS Server
Secondary DNS
Server
Menu 3 LAN Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Figure 16-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup
Table 16-1 DHCP Ethernet Setup
default gateway and DNS servers to Windows 95, Windows NT
and other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP
address pool.
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the
subnet mask.
Prestige 660R ADSL 2+ Access Gateway
DESCRIPTION
First address in
the IP pool
Size of the IP
Pool
IP addresses of
the DNS
servers
This is the IP
address of the
Prestige
EXAMPLE
Server
(default)
192.168.1.33
32
16-3
Advertisement
Table of Contents
Troubleshooting
