Teledyne 3010TA Operating Instructions Manual page 40

4 Operation
Press Enter to change the password (either the default
previously assigned password), or press Escape to keep the existing pass-
word and move on.
If you chose Enter to change the password, the password assignment
screen appears.
Enter the password using the < > arrow keys to move back and forth
between the existing password letters, and the
letters to the new password. The full set of 94 characters available for pass-
word use are shown in the table below.
Characters Available for Password Definition:
When you have finished typing the new password, press Enter . A
verification screen appears. The screen will prompt you to retype your
password for verification.
Wait a moment. The entry screen will give you clearance to proceed.
Use the arrow keys to retype your password and press Enter when
finished. Your password will be stored in the microprocessor and the system
will immediately switch to the Analyze screen, and you now have access to
all instrument functions.
4-8: Part I
or
arrow keys to change the
Model 3010
TA
or the