Teledyne 3010TA Operating Instructions Manual page 14

1 Introduction
Digital Meter
Alphanumeric
Display
Figure 1-1: Front of Unmounted Control Unit
Function Keys: Six touch-sensitive membrane switches are used to
change the specific function performed by the analyzer:
• Analyze
• System
• Span
• Zero
• Alarms
• Range
Data Entry Keys: Six touch-sensitive membrane switches are used to
input data to the instrument via the alphanumeric VFD display:
• Left & Right Arrows
• Up & Down Arrows
1-2: Part I
Data Entry Buttons
Perform analysis for oxygen content of a sample gas.
Perform system-related tasks (described in detail in
chapter 4, Operation.).
Span calibrate the analyzer.
Zero calibrate the analyzer.
Set the alarm setpoints and attributes.
Set up the 3 user definable ranges for the instrument.
Select between functions currently
displayed on the VFD screen.
Increment or decrement values of
functions currently displayed.
Model 3010
Standby Switch
F unction B uttons
TA
Door Latch