Table of Contents
Advertisement
Percent Paramagnetic Oxygen Analyzer
•
•
•
•
•
•
•
•
•
•
Note: If you require highly accurate Auto-Cal timing, use external
Auto-Cal control where possible. The internal clock in the
Model 3010MB is accurate to 2-3 %. Accordingly, internally
scheduled calibrations can vary 2-3 % per day.
Power Connection
Analog Outputs
Alarm Connections
RS-232 Port
Remote Probe
Remote Span/Zero
Calibration Contact
Range ID Contacts
Remote Probe
Network I/O
Teledyne Analytical Instruments
AC power source, 100-240VAC, 50/60
Hz
0-1 V dc concentration and 0-1 V dc
range ID. Isolated 4-20 mA dc and 4-20
mA dc range ID.
2 concentration alarms and 1 system
alarm.
Serial digital concentration signal output
and control input.
Provides all electrical interconnect to the
Analysis Unit or Remote Probe.
Digital inputs allow external control of
analyzer calibration.
To notify external equipment that
instrument is being calibrated and
readings are not monitoring sample.
Four separate, dedicated, range relay
contacts. Low, Medium, High, Cal.
Interfaces with an Analysis Unit or
Remote Probe (external sensor/sample
system).
Serial digital communications for local
network access. For future expansion.
Not implemented at this printing.
Part I: Control Unit
Part I: 1-5
Advertisement
Table of Contents
