Drawing And Editing Wires - Yamaha DME64N Owner's Manual

Drawing and Editing Wires

Wire
Objects that are arranged on sheets in the Configuration or User Module windows can be connected
to each other by wires. Not only does this let you logically connect signal sources (output side) and
destinations (input side), it also lets you draw connections and independent lines on the display. Each
wire has at least two wire nodes. Between the nodes are line segments.
Selecting Wires and Canceling Selection
You can select a line segment by clicking on it.
If you hold down the <Alt> key while clicking, you will select the entire wire.
NOTE
The color used when a wire object is selected can be set with [Selected Color] in the "Wire Properties" dialog box.
Wire Node Line Segment
Chapter 4 Designer
DME Designer Owner's Manual 253