Yamaha DME64N Owner's Manual page 219

Security Settings
Turns user module security ON or OFF, and sets a password.
• [Enable Security]
Enables user module security. If you turn this function ON when no password is currently set,
the "Set Password" dialog box appears. Enter a password, then click the [OK] button.
If you change the setting from OFF to ON, the "Input Password" dialog box appears. You
cannot turn Security OFF until you enter the correct password.
NOTE
When security is active the editor cannot be opened unless the appropriate password is entered. Once the
password has been entered security is temporarily disabled until the DME Designer is quit, or a different file is
opened.
• [Set Password] Button
Changes the password for user modules. Clicking this button displays the "Input Password"
dialog box. Enter the current password and click the [OK] button. The "Set Password" dialog
box will be displayed, and you can set a new password.
This button will be grayed out when [Enable Security] is turned OFF.
[OK] Button
Accepts the changed settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
Chapter 4 Designer
DME Designer Owner's Manual 219