Eq Editing - Yamaha LS9 User Manual

Yamaha Commercial Audio
4.5

EQ Editing

Every channel in the LS9 has a dedicated Parametric EQ (PEQ). The LS9
also has Graphic EQs (GEQs) that can be assigned (inserted) on input or
output channels.
Note: assignment of GEQs to channels must be done on the console and
cannot be done in StageMix.
EQ Curve in Mixer Screen
The EQ curve section on the Mixer Screen will show the user whether a GEQ
is available on any channel. If GEQ is available on a channel in addition to
PEQ, the user will be able to view the curve for either of these EQs and
access the editing screen for either type of EQ.
Green and blue dots below each EQ curve indicate the types of EQ available
on that channel, and the type of EQ (PEQ or GEQ) that is currently displayed
for that channel. A green dot indicates PEQ and a blue dot indicates GEQ.
When only PEQ is currently available on a channel, no dots will appear below
the curve. (In Demo mode, GEQs appear on Mix busses 1, 7 and 8).
In the example above:
• Mix Bus 1 has both PEQ and GEQ available, and GEQ is currently being
displayed (the blue dot is solid and the curve is blue).
• Mix Bus 2 has both PEQ and GEQ available, and PEQ is currently being
displayed (the green dot is solid and the curve is green).
• Mix Busses 3-8 have only PEQ available so no dots are displayed below
their EQ curves.
Changing the EQ Curve Display between PEQ and GEQ
On any channel displaying both a green and blue dot below the EQ curve, the
user can select either of those EQ types to be displayed by using a swipe
gesture in the EQ curve area.
If a PEQ curve is currently displayed, swiping from right to left will cause the
GEQ curve to be displayed.
If a GEQ curve is currently displayed, swiping from left to right will cause the
PEQ curve to be displayed.
Accessing the EQ Editing Screens
To access the PEQ or GEQ Editing Screens, tap on the EQ curve to open the
appropriate EQ Editing screen.
LS9 StageMix V1.0 User Guide
Page 16