Yamaha DME64N Owner's Manual page 73

Fade Time
Sets the fade time: i.e. the time it will take fader parameters to reach their new settings when a
scene is recalled. The changes are smooth and continuous. If only the presets in the recalled
scene are set when that scene is recalled, the volume will be adjusted while the sound from the
previous scene is playing, until the new level is reached If the configuration also changes, the
volume will rise from silence until it reaches the new value. This can be set from zero to 60 seconds,
in 0.1 second increments.
Protect
Turns the Protect function ON or OFF.
When ON scene data cannot be deleted, overwritten, edited, or renamed.
NOTE
Right-click in the list and use the contextual menu that appears to set User Defined Button, Program Change, GPI In, or GPI
Out for the scene.
[Cut] Button
Cuts the scene selected on the list. The button will be grayed out and cannot be used when the unit
is online or when an SP2060 preset is being used.
[Copy] Button
Copies the scene selected on the list. The button will be grayed out and cannot be used when the
unit is online.
[Paste] Button
Pastes the contents of the cut or copied scene into the scene selected on the list. Cuts the scene
selected on the list. The button will be grayed out and cannot be used when the unit is online or
when an SP2060 preset is being used. The selected scene will be overwritten.
[Insert] Button
Inserts the contents of the cut or copied scene into the location of the scene selected on the list.
The selected scene and those below are moved down by one. For example, if "Door_Open" was
stored as scene number "005," and selected when the [Insert] button was clicked, the inserted
scene would become scene number "005," and "Door_Open" would be moved to scene number
"006."
If a scene is stored in the lowest scene on the scene memory list, the button will be grayed out and
the insert function will not be available. Delete the contents of the lowest scene before attempting
to use the insert function.
NOTE
Move the scene data to a different scene memory when you don't want to erase the contents of the lowest scene.
Click the
[Insert] button
Chapter 3 Main Panel Window
DME Designer Owner's Manual 73