Get Log" Dialog Box - Yamaha DME64N Owner's Manual

Chapter 3 Main Panel Window
[Display Log Buffer Full Message]
When a check is placed here, "Log Buffer Full" messages will be displayed on the displays of all
DME units in the zone.
[Log List Setup] Button
Sets events sent from the DME units. Clicking here displays the "Event Log List" dialog box.
[OK] Button
Applies any setting changes and closes the window.
[Cancel] Button
Closes the window without changing any settings.

"Get Log" dialog box

Click the [Get Log] button in the "Event Logger" window to display the "Get Log" dialog box.
DME List
Displays the IP addresses and types of DME units included in the device group. Click the DME
from which to obtain events by placing a check next to it.
[Output File Name]
Sets the file name and save location for the log file. Clicking the [Browse] button opens the file
select dialog box, where you can select a file.
[DME Log Clear]
Clears (erases) logs in the DME checked. When you click this button, a confirmation dialog is
displayed.
[OK] Button
Applies any setting changes and closes the window.
[Cancel] Button
Closes the window without changing any settings.
68 DME Designer Owner's Manual