Yamaha DME64N Owner's Manual page 134

Chapter 3 Main Panel Window
[Add File] Button
Adds a library file saved by the component editor (.cel extension) to the SP2060 selected in the
SP2060 list. When the [Add File] button is clicked the "Open" window will appear. Select a library
file and click the [Open] button to add the library.
The [Add File] button will be grayed out and inoperable if no SP2060 is selected.
Refer to the "Libraries" section on
[Delete File] Button
Deletes the selected library from the library list. When this button is clicked an "Are you sure?"
dialog box will open. Click the [YES] button to delete the selected library.
Click the [NO] button to abort the library delete operation.
The [Delete] button will be grayed out and inoperable if a library is not selected.
[Move UP] Button
Moves the currently selected library up one position in the library list. The [Move UP] button will be
grayed out and inoperable if a library is not selected.
[Move Down] Button
Moves the currently selected library down one position in the library list. The [Move Down] button
will be grayed out and inoperable if a library is not selected.
[Duplicate] Button
Copies the library from the SP2060 selected in the SP2060 list to a different SP2060. When the
[Copy] button is clicked the "Duplicate" window will open. Select the destination SP2060 and click
the [OK] button to copy the library. Multiple destination SP2060 units can be selected.
Click the [Cancel] button to abort the library copy operation.
The [Copy] button will be grayed out and inoperable if no SP2060 is selected.
[Import List] Button
Imports a library file (.llf extension) to the SP2060 selected in the SP2060 list. When the [Import List]
button is clicked the "Open" window will appear. Select a library file and click the [Open] button to
import all libraries included in the library file.
Click the [Cancel] button to abort the import operation.
The [Import List] button will be grayed out and inoperable if no SP2060 is selected.
[Export List] Button
Exports and saves the library of the SP2060 selected in the SP2060 list as a library file (.llf
extension). When the [Export List] button is clicked the "Save As" window will appear. Select a file
format and click the [Save] button to save the library file. If you select the "Library List File" format
only the paths will be saved, and if you select the "Library List File with data" format the actual
library data will be saved to the file.
Click the [Cancel] button to abort the export operation.
The [Export List] button will be grayed out and inoperable if no SP2060 is selected.
[Upload List] Button
Sends the SP2060 library to an SP2060 unit. When the [Export List] button is clicked the "Select
Device" window will open. Select an SP2060 and click the [OK] button to send the library. Multiple
destination SP2060 units can be selected.
Click the [Cancel] button to abort the send operation.
[Close] Button
Closes the window.
134 DME Designer Owner's Manual
page 337 for information on component editor libraries.