Yamaha DME64N Owner's Manual page 362

Chapter 6 Component Guide
Crossover Processor II
The following five types of components are available in the Crossover Processor II group: 2 Way, 3
Way, 4 Way, 5 Way, and 6 Way. Crossover processor II components have a single input and 2 to 6
outputs.
Double-click a component to display the component editor for it. The number of bands may vary
depending on the component, but they share a common configuration in the component editor.
There are input and output level meters in the upper part of the window. If you click the [Crossover],
[Delay], [PEQ], or [Compressor] button in the [Navigator] section, an editor for the crossover, delay,
parametric equalizer, or compressor will be displayed in a separate window. A separate component
editor will open for each output channel (such as Low or Mid) when you click on the delay, parametric
equalizer, or compressor.
362 DME Designer Owner's Manual
Crossover Processor II
1
3
4
7 8 9 5 6
2
)