Yamaha DME64N Owner's Manual page 246

Chapter 4 Designer
Block
Sets the block form used in the sheet. Displays a list where you can select the form.
[Block]
Makes the blocks rectangular and groups the text in the port icons and port names.
[Explode]
Makes the blocks into sets of four lines, and does not group the text in the port icons and port
names.
[Paper Size]
Sets the size of the paper.
[Preset Size]
Displays a list where you can select preset paper sizes. When you select a paper size, numerical
values are set for [Horizontal] and [Vertical].
[Custom Sizes]
Set a custom size by specifying the vertical and horizontal sizes of the sheet.
[Unit]
Selects the unit used for setting the sheet size.
[OK] Button
Saves the DXF file according to the settings in the dialog box.
[Cancel] Button
Cancels the DXF file export process.
246 DME Designer Owner's Manual
• [Horizontal] Box
Sets the horizontal width of the sheet.
• [Vertical] Box
Sets the vertical height of the sheet.