Yamaha DME64N Owner's Manual page 90

Chapter 3 Main Panel Window
[Event Operation]
Set the operation that is executed when the event starts.
[Operation]
When you click this button, a list of events is displayed. Specify the operation that is executed
when the event starts.
The following four items are on the list:
• [Scene Change]
• [Parameter Value Edit]
• [GPI Out]
• [Play Wav File]
[Operation Setting]
The content changes according to the event selected for [Operation].
• When [Scene Change] is selected:
• When [Parameter Value Edit] is selected:
90 DME Designer Owner's Manual
Changes the scene.
Changes a parameter.
NOTE
If user module security is enabled, the components are not displayed. However, parameters displayed in the user
module editor are displayed here.
Sends GPI output.
Allows initiation of Wave file playback.
Select the scene to be recalled from the [Scene] list. Stored scenes are displayed in the list.
[Scene]
Select a scene from the list.
If the DME unit's current scene differs from the scene specified in event scheduling, the scheduled
scene will be recalled. If the DME unit's current scene is the same as the scene specified in event
scheduling, the scheduled scene will not be recalled.
[DME Unit]
From the list, select the DME unit to which this scheduled event will apply. The DMEs included in the
zone are displayed in the list.