Chapter 3 Main Panel Window
"Synchronization" Dialog Box
When you click the [Synchronization] command on the [Tools] menu, the "Synchronization" dialog box
is displayed. The data from the current device group in the Designer is synchronized with the DME or
SP2060 unit.
Here you can make settings for synchronizing the unit in DME Designer one-on-one with the DME or
SP2060 that actually exists on the network.
Names and Functions
[Designer]
Message Area
[Close this window
after synchronization]
checkbox
84
DME Designer Owner's Manual
[Go On-line] Button
[Go Off-line] Button
[Network]