Table of Contents
Advertisement
Your UX-I 14 prints by means of thermal printing. The head applies heat to
special paper which is chemically treated to change colour when heated to
a certain level, and this creates the printed text or image.
To assure a long life for your machine and obtain the best reproduction
quality, we recommend that you only use the following Sharp recording
paper:
FO-20PR Recording Paper (30 m
roll)
Using a non-Sharp brand ofpaper ma>resu[t in poor cop~ qualiv and e.xcessjvebuild-
up oj-residl~eon the head.
Do not
unpack the paper until you are ready
to use it. It may become
discolored if:
s
It is
stored
in a place with high humidity or high temperature.
c It is exposed to direct sunlight.
. It comes in contact with glue, thinner, or a freshly copied blueprint.
. It is scratched, causing heat due to friction.
A rubber eraser or adhesive tape is used on it.
Sharp paper has a black stripe on the last 1.5 m of the roll. When the machine
detects this stripe, it finishes printing the current page and then stops. NO
PAPER will appear in the display, and further reception and copying will not
be possible. To replace the paper, first take out the old roll, then load the new
roll as described in "Loading the recording paper" in Chapter 2.
--
USER MAINTENANCE
8-1
Advertisement
Table of Contents
