Table of Contents
Advertisement
OPTIONAL SE~lNGS
Switch 4: AUTO FAX/PHONE CHANGEOVER
Press "l"
(YES) to have the machine detect whether incoming calls are voice calls or fax
transmissions in automatic reception mode.
Press"2" (NO)to turn the functionoff.
Factory setting: "2"
Switch 5: TELEPHONE/FAX REMOTE NUMBER
This sets the 1-digit code number for transferring an incoming fax from an extension telephone
to the UX-114. Enter any number from "0" to "9".
s Factory setting: "5"
Switch 6: TRANSACTION PRINT SELECT
This sets the condition for printing out Transaction Reports. Enter a number from "1" to "4" as
follows:
"l" (ALWAYS PRINT):
Print out after each transmission, reception, or error.
"2" (ERROR PRINT):
Print out only after an error occurs.
"3"(SEND ONLY):
Print out only after a transmission.
"4" (NEVER PRINT):
Never print out.
c Factory setting: "2"
Switch 7: PSEUDO RINGING DURATION
This sets the duration of pseudo ringing when Automatic Fax/Phone Changeover is turned on.
Enter a number from
"l"
to "4" as follows:
"1"
(15 SEC.):
15 seconds
"2" (30 SEC.):
30 seconds
"3" (60 SEC.):
60 seconds
"4" (120 SEC.):
120 seconds
s Factory setting: "1"
Switch 8: PAPER SAVE
This reduces the vertical length of documents received, allowing you to save paper. Enter a
number from
"1"
to "3" as follows ("S" will appear highlighted in the display while Paper Save is
turned on):
"1"
(MODE 1):
Reduce only the white spaces between lines.
"2" (MODE 2):
Reduce the entire document by 500/0 (only when standard resolu-
tion is used).
"3" (NO):
No Paper Save.
Factory setting: "3"
Switch 9: TIME SAVE
This reduces the vertical length of documents transmitted by 20%, saving line time and thereby
allowing you to reduce telephone costs. Press"1" to turn the function on, or "2" to turn it off.("T"
will appear highlighted in the display while Time Save is turned on):
Factory setting: "2'1
.
6-2
OPTIONAL SEnlNGS
Advertisement
Table of Contents
